Thanks for the help on the floor - lets talk doors

[SteveB]

Post deleted by SteveB

[SteveB]

The wife got back w/ the camera. Here's some photos.

First the stall fronts and sliding doors.

[SteveB]

I used National sliding door hardware with the "nail on board" type of track. I would highly recommend this type of track compared to the ones secured w/ lag bolts. Simpler and stronger.

[SteveB]

This type of track alowed me to nail a board to allong the top of the stall fronts. Since my stalls were built free standing in a clear span building this I did this to stiffen up the stall fronts.

[SteveB]

Edge protectors.

[SteveB]

Wall braces.

[SteveB]

Feed tubs. We went with the rubberized type. A little extra time on the table saw to knock of the sharp corners off the support rails helps prevent the horses from doing it themselves.

[SteveB]

We put a kickboard acrross the entrance. Keeps the shavings in and provides something for the sliding door to ride on.

[SteveB]

Stall mats on top of stone dust.

[SteveB]

Barred window from inside.