Wife wants two light switches to control an overhead light in the kitchen. Currently there is one light switch near the back door, but no way to turn on the light when your inside without crossing a dark room. Now the issue. THe kitchen has had some recent remodels and wallpaper, work so wife doesnt want any more holes.
The good news is that it can be done. [img]/forums/images/icons/smile.gif[/img] The bad news is I think it's going to take some rewiring and fishing wires to do it. [img]/forums/images/icons/frown.gif[/img]
You might want to look either here or here for the wiring information you need complete with diagrams. The internet is a wonderful thing. [img]/forums/images/icons/wink.gif[/img]
Good luck with your project. I hope this helps. [img]/forums/images/icons/smile.gif[/img]
Gary, Thanks. I know how to wire a normal 3way but this one has to be done on the switch side and I cant run any more wires. to the light or power source.
I cant route any new cables without damaging the walls or ceiling. Not going to do that.
You need to run a new 3 conductor wire to the new switch location. and wire up as above. Let me know if I confused you. I know......kinda crude drawings [img]/forums/images/icons/grin.gif[/img]