Gotta "Hole" problem

[Handyman]

I need to drill (10) 2 1/4" holes in 1/8"-3/16th steel.

Do they make a 2 1/4" knockout or a metal holes saw for steel that will last ?

[dummy]

I have had good luck with these mcmaster on page 2188

[Inspector507]

A knockout-punch for 2" conduit will be about 2 1/2" when you're done.

[CJDave]

[img]/forums/images/icons/tongue.gif[/img] You can forget the knock-out cutter that we normally use on electrical panels......the material that you mentioned is too thick. A cup-type hole saw will do the job; slow, but effective. [img]/forums/images/icons/crazy.gif[/img]

[Handyman]

Hi Dave, Problem solved at my end...

I ended up buying (3) 2 1/4" hole saws. I was able to accomplished what I wanted with fine style [img]/forums/images/icons/grin.gif[/img]
Installed 3 today and will finish tomorrow installing the rest of my chicken lights thru the front bumper [img]/forums/images/icons/cool.gif[/img]

Thanks for the suggestions guys.