Our second floor bathroom is in need of renovation. The new sink has been purchased and a cbinet is being constucted. Its of farm milled oak with mortice and tenon joints and raised panells.
Next step is floor. I'm thinking of doing it in 1 inch pine planks 11 inches wide.These will be glued up with resorcinol glue, have tonge and groove and be full length. The grain will be placed for least warpage. For fastening down I intend to use a Forstner bit to drill 1/2 way through and then make slotted screw holes. The planks will be bedded in mastic and held down by semi loose screws. Round plugs to fill the forstner will then cover up the screws.
The walls will have mortice and tenon with raised panell wainscotting made of pine. They should go about 5 feet high.
Reply With Quote
