A picture of the router table just recently built. It has three different fence options and fits on a B&D Workmate.
Egon
A picture of the router table just recently built. It has three different fence options and fits on a B&D Workmate.
Egon
My Radial Arm drill press sitting on the router table set up for an angled mortice on a piece of wood that will be used for the frame of a soil screen.
Egon
Outside view of partially completed soil screen.
Egon
Outside view of partially compleated sink cabinet.
Egon
Almost finished view of the cabinate. Still requires hardware.
It's made of oak with pine bottom and poplar back. The bottom and back are removeable. Raised panel, pinned mortice and tenon joints with no nails or screws used. All wood was milled from farm logs.
Egon
Completed soil screen. Not fancy and labour intensive but will do for my purposes.
Egon
Nice work, Egon.
Yes, but I thought I was seeing a pattern: partially completed, not quite done...
[img]/forums/images/icons/smirk.gif[/img]
Darn fine looking cabinet. Looks finished to me.
Steve
Another pattern was obvious.... [img]/forums/images/icons/crazy.gif[/img]
outside instead of inside. [img]/forums/images/icons/wink.gif[/img]
I believe it's because of Egon's massive sized shop!!! [img]/forums/images/icons/grin.gif[/img]
Gary
Bluegrass Music ...
Finger-pickin' good!