Cordless belt fed screw gun (Senco)

[Pat]

Me no savy "ACQ EXCUSE", Kemo Sabe.

There are deck screw guns with extended handles so you don't have to get on your knees or even bend over very far.

[img]/forums/images/icons/smile.gif[/img] Pat [img]/forums/images/icons/smile.gif[/img]

[johnday]

Pat; Sorry, I was referring to the new wood treatment ACQ. I can't remember what the acronym abbreviates other than the Q standa for "quate". The new treatment is much more corrosive than the tried and true CCA we were used to. Seems the EPA decided that to prevent children from eating the treated wood they would outlaw it from many former uses that the common guy was using it for. Something about the danger of the arsenate which the "A" refers to.

I was wondering if the screwgun you have, has available hot dipped zinc coated, or stainless steel screws available.

It sure would be nice to not bend over for hours screwing down deckboards.

Again, sorry for any confusion. I refer to the new treatment as an excuse because many of us feel that it was an unwarranted move on the part of the EPA to discontinue the use of CCA. Not only must the fasteners used for ACQ have to be higher grade, thusly more expensive, but any hardware such as joist hangers should be a higher quality also. [img]/forums/images/icons/crazy.gif[/img]

[Pat]

John, I find that the specific model Senco that I have has been discontinued. A local (30 miles) Ace hardware has the only two around. $199 for the gun and a (they claim) $100 RotoZip tossed in for free. A handyman my mom hired liked my gun so much (I helped him hang some drywall) that he ran on about it to his wife and she got the info from me and bought him a current production 19volt gun only (no rotozip) for $140 as an anniversary present. He said it will do 2 inch screws. I don't know if it will do larger or not but a google on Senco will find the Senco web site (if it isn't Senco.com) and the info is there.

These semi-automatic auto loaders with "pre-ban 50 round clips... just joking about pre-ban) are better for repetitive screw shooting by far than a "single shot"

The gun needs a guick simple sdjustment to change screw lengths. There is a simple depth adjust for how hard you want the screw driven before it automatically quits driving it.

You can hold the trigger down to shoot a whole clip of ammo. It fires a screw to a preset depth everytime the nose switch is depressed. You don't waste time or battery juice spinning it up to speed for each individual screw.

The model(s) made for decking/flooring have the extended handle so you remain upright while shooting and don't need knee pads.

I have found that I can reload the plastic ammo belts several times to shoot "bulk" packaged screws. How many times is unknown as we used about a thousand factory loaded screws and just made some tests about reloading. Not that I'm cheap mind you, but I have a lot of bulk screws in stock and I'd rather load them into the old belts than to have to manually feed them one at a time to a reqular screw gun.

With a drill/driver, even with the special accessory screw holder bits, I find that I end up eventually with a few wounds on my fingers. Not a single booboo aftter 1000+ screws with the Senco. I haven't needed to change the bit due to wear in the Senco yet but there is a slide switch/lever that is realy convenient for swapping the bit. It comes with various bit styles and sizes for common pattern screw heads.

[img]/forums/images/icons/smile.gif[/img] Pat [img]/forums/images/icons/smile.gif[/img]

[MikePA]

<font color="blue">...hot dipped zinc coated...</font color>
I know several places that indicate these are OK for ACQ lumber, but I wouldn't use anything but stainless steel. Someone on CBN (or TBN) indicated they used hot dipped zinc coated screws to hold some concrete forms together. When he took them apart after a week or two, they had already corroded.

[johnday]

Pat; Thanks for the info. I have a couple Senco nail guns. If they are any indication of the quality of the rest of their tools, there is no doubt in my mind that your driver is right there too.

Quality tools really make the job a lot more enjoyable [img]/forums/images/icons/smile.gif[/img]

[johnday]

Mike; Know what you mean. Lowes in their effort to please the environmentalists, moved to ACQ lumber way before it became required. I guess in a sense that was alright to some people. The big problem is, I wonder how many contractors aside myself didn't notice it, and used fasteners and hardware like we did with the CCA? I'm also curious if Lowes and anyone else that did this plan on backing us from the lawsuits that may come out of this due to deck failures.

Man, a huge can of worms has been opened, and I'm afraid that contractors and builders are going to be the ones to fend for themselves. [img]/forums/images/icons/confused.gif[/img]

[ScottAR]

Lowe's corporate knows there will be problems and has instructed stores to call a certain # of a certain excutive office who's name escapes me if there are problems. One of their tv broadcasts showed all this. So they are aware. A customer came into my dept. the other day wanting to know what to fastners to use for the lumber. Seems he'd attached somthing to his deck and it'd corroded in 3 months. Got him some SS ones and he was happy.

(yes Lowe's has a tv channel piped to the stores)