Results 1 to 3 of 3

Thread: Metal Buildings and wiring

  1. #1
    Senior Member
    Join Date
    Sep 2002
    Location
    St.Cloud, FL
    Posts
    207

    Metal Buildings and wiring


    I want to install a flood light on my metal building, but I do not know the best way to do it. Do you install the octagon box inside the building and cut a hole in the metal or install a weatherproof box outside? If I put a switch inside, what kind of box do I install that would attach to the metal stud? What type of screws should be used?

    Thanks,

    Joe

  2. #2
    Senior Member
    Join Date
    Sep 2002
    Location
    Central Ohio
    Posts
    362

    Re: Metal Buildings and wiring

    Either way on the box will work.
    As far as a switch box, they make all kinds of metal ones to mount on metal studs. It's done in a commercial installation every day. The box stores sell them

  3. #3
    Senior Member
    Join Date
    Sep 2002
    Location
    St.Cloud, FL
    Posts
    207

    Re: Metal Buildings and wiring

    I didn't realize some of the outlet boxes were dual purpose wood and steel. After your response I took a closer look and noticed the holes in the side for use on metal studs.

    Thanks for the help.

    Joe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •