Results 1 to 5 of 5

Thread: Myth or real?

  1. #1
    Member
    Join Date
    Dec 2005
    Location
    usa
    Posts
    33

    Myth or real?

    We want to drill a well but only going to use it may be once or twice a year. A friend told us that the well will become dry eventually because lack of use. THis area doesn't have a water table. The well gets water from cracks in the rock. His explanation was that water flow through those cracks when the well is being used regularly. When not in use, it will eventually plug by mineral deposits caused by standing water. Is this a myth or real? BTW, the water in this area does have very high mineral content.

  2. #2
    Senior Member
    Join Date
    Sep 2002
    Location
    Nova Scotia,Canada
    Posts
    3,108

    Re: Myth or real?


    Would not the water be standing still prior to drilling? [img]/forums/images/icons/confused.gif[/img]

    Egon


  3. #3
    Senior Member
    Join Date
    Oct 2002
    Location
    Southeast Iowa
    Posts
    893

    Re: Myth or real?

    [img]/forums/images/icons/tongue.gif[/img] Dear stumpy: About the only thing that would cause that well to plug up and quit drawing is if the perforations rusted up. If you used something besides steel pipe, you would avoid that issue entirely. I have set rigs up on water wells ....big ones....14-20"...... up to 1000' deep....that had not run for twenty years, and many were silted up from lateral flow through the well by various water strata. After we reopened the well by bailing with a Hooded Moran Bucket, we ran a scratcher tool and then we ran a dry ice tool to blast the perforations open. If you are in rock, that's a plus, less silt, less lateral movement of water. [img]/forums/images/icons/tongue.gif[/img]
    CJDave

  4. #4
    Senior Member
    Join Date
    Sep 2002
    Location
    Bel Air, Maryland
    Posts
    398

    Re: Myth or real?

    MYTH
    :: D A V E
    :: g a t o r b o y

  5. #5
    Senior Member
    Join Date
    Jun 2005
    Location
    Wherever I park the motorhome
    Posts
    116

    Re: Myth or real?

    Hard water scale, high TDS, chlorides and bacteria block well screen or rock bore fissures when/where the velocity of the recovery water flow is the highest. That can form hard encrustations reducing the recovery rate of the well. Real well screening doesn't rust.

    So not using the well for long periods would reduce the buildup of anything that would block the recovery flow.

    There is nowhere that doesn't have a water table, although it may be deeper than someone wants to look for it but more than likely in flat/rolling land it won't be more than a few hundred feet. And a well with water in it will only lose its water if the area suffers a serious drop in the water table.

    Gary
    Quality Water Associates

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •