I need feed back on the use of corral panel for a perimeter fense. The fence will eventually be used to hold horses in. I took a look at some at TSC and at a local place that makes then locally. The type i was looking at come in 10 foot sections. I was thinking about linking them together then attaching them to t-post driven 2 to 3 feet into the ground. As far as the corners I was thinkin of using 4 x 4. I have seem them used in my area, people sometimes slip pvc pipe over the t-post and cap them to make it look like a steel pipe. I am forced into not using barb wire due to restriction in my area. Plus I can't afford to have a pipe fence.