I have a shed I want to run power out to. I will not have any high power needs, i.e. welding, etc.. I plan to run 200 feet (from the house breaker box to the shed) of 10/3 from a single 20 amp breaker. On one circuit, I will have 2 inside outlet plugs, one on each side of the shed, both on a GFI. On the other circuit, I will add 2 outside 500 W lights, and 4-100w lights inside. I will run the wire in PVC ,12 inches down; the wire will be direct burial type. I will run all wire, 14/2, in the shed inside of PVC conduit to protect it from the mice. I will run phone cable outside of the conduit, at the bottom of the conduit.

Questions

If I use schedule 80 threaded conduit pipe, can I only go 6 inches down?

What size conduit should I use with 10/3, 1 inch?

Will this set up work?

Thanks for your help. [img]/forums/images/icons/confused.gif[/img]

Tom