I want to get rid of weeds along my barbwire fence. It is 15 acres of fence line. What does everyone use to safely eradicate weeds in this case. I have cattle on the land, so I have to be carefull what I do. Is Roundup safe for this use?
thanx
Printable View
I want to get rid of weeds along my barbwire fence. It is 15 acres of fence line. What does everyone use to safely eradicate weeds in this case. I have cattle on the land, so I have to be carefull what I do. Is Roundup safe for this use?
thanx
</font><blockquote><font class="small">In reply to:</font><hr />
Is Roundup safe for this use?
[/ QUOTE ]
That's what my neighbors and I used.
I just sprayed a mile and half with generic roundup. I try to do that every year. It'll take a few applications on trees. And cedar trees seem to be imune.
A weedeater with blades, or deer!
Roundup works just fine. I do worry about the few hours before it gets absorbed by the plants, but so far I haven't killed any livestock. It does a pretty good job and is supposed to be fairly "friendly" to people and animals. 'Course, "Agent Orange" was supposed to be harmless to the Vietnam soldiers we dropped it on back then... [img]/forums/images/icons/tongue.gif[/img]
<font color="blue"> ( I do worry about the few hours before it gets absorbed by the plants, but so far I haven't killed any livestock. ) </font color>
Roundup is about as dangerous as drinking dish soap. The nice thing is that you are only using a couple ounces of it per gallon, so the mixture you are spraying on the weeds I would say is pretty safe.
Thanx for all the replies! I am going to clear my fence line with it. Weedeater sounds good, but we have very PERSISTANT weeds down here in Texas [img]/forums/images/icons/smile.gif[/img] They need to be eliminated with 'extreme prejudice'!
Another good product is called "sahara" it stops any growth for a year.
Roundup in my experience has controlled growth for a month at a time.
<font color="blue"> Roundup in my experience has controlled growth for a month at a time. </font color>
Roundup only kills existing weeds by the weed absorbing the Roundup through it's leaves. It is not a pre-emergent that will kill any future growth such as Sahara is.
</font><blockquote><font class="small">In reply to:</font><hr />
Roundup is about as dangerous as drinking dish soap. The nice thing is that you are only using a couple ounces of it per gallon, so the mixture you are spraying on the weeds I would say is pretty safe.
[/ QUOTE ]
I kinda disagree with such a broad statement. I use the 41% generic stuff from Agri-Supply mixed according to the directions. If I spray while wearing shorts and any of the spray mist makes its way onto my legs it will burn. It takes 5-10 mins for me to feel it but it does burn. I would also recommend eye protection while spraying.
Herbicides/insecticides are designed to absorb into tissue, be it plant leaf or human skin. Toxic or not they are going to get into your blood stream if you expose yourself to them. Eye tissue, soles of your feet, and palms of your hands are the most "absorbable" tissues of your body. Therefore, eye protection, rubber boots, and rubber gloves. Long clothing washed separately. Enough of anything foreign in your blood stream and your liver/kidneys are going to complain. These are both internal organs you want to keep happy.
Livestock and wildlife are generally smart enough to stay away from the stuff.
I treated a 10 acre parcel with generic roundup last year. Pretty close to what you are looking at.
A couple of observations:
1. Buy the generic stuff. It is dramatically cheaper than the brand name chemical. No difference except the price. Buy from farm supply.
2. It's a contact killer. The weeks have to be there and you have to make contact with the solution to their leaves. You need to have dry weather for 48 hours after application. Meaning, no rain for 48 hours.
A fellow above talked about possibly using a non-contact weed killer. Just be sure to know that the non-contact solution can 'run' down hills and kill other vegitation that are completely away from the place where you intend to kill. I also think that the long-term killers are significantly more dangerous than Roundup. The 'upside' of non-contact is that it will kill stuff that has not emerged yet. I wait pretty late in the year before application of Roundup so that whatever is left over is quite small.
3. Follow the directions. The solution I bought wanted 1/2 cup per 1 gallon of water. I think it took me 15-20 gallons of the mixed solution to handle the 10 acre perimeter.
4. Yes, be careful with contact. The chemical is very mild in composition, but you can definitely have a skin reaction if it gets in contact. I do not personally wear protective garments. But I DO take care not to get it on my skin, or I wash it off immediately.
5. Apply the product when there is no wind. The wind will carry the solution and you may kill vegitation that you did not intend to kill. Plus you may get it on your skin.
6. It takes quite a few days for the weeds to actually die. Don't worry and don't change your mixture. It just takes that long and you only waste expensive chemicals if you try to speed up the process by increasing the mix ratio.
7. You will need to spot-treat some weeds that either get missed, or some underlying weeds that don't get killed during the first round.
8. Think about how wide of a swath you want to kill. I think that I made mine a little bit too narrow. Like maybe 1' on each side of the fence. I think I'd prefer something more like 1 1/2' or 2' each side.
9. I'm happy with the results. It looks dramatically nicer (to me) with those weeds away from the fence, and it helps me out when I need to brush hog the parcel, and it's a lot easier than using a weedeater.
10. By the way, you do have the option of not clearing those weeds at all. Some of the folks in my area don't understand why I want to clear under the fence at all. And the 3rd option is to use a trimmer. Quite a bit of work there.
Good luck and I hope this helps.
<font color="blue"> You need to have dry weather for 48 hours after application. </font color>
Maybe generic isn't so good after all. I think Roundup requires about 2 hours of dry weather after application.
RoundUp Concentrate uses about 1.5 ounces per gallon -- when you are using a 1/2 cup (5 times as much), you may need to recalculate your costs of generic vs. RoundUp.
I buy the 1-gallon container for $99 at Home Depot and it makes about 85 gallons.
What generic brand do you buy? Just curious.
<font color="blue"> I think Roundup requires about 2 hours of dry weather after application. </font color>
They do say 2 hrs. I always try to give it a day or so, though.
<font color="blue"> I buy the 1-gallon container for $99 at Home Depot and it makes about 85 gallons. </font color>
I used to do the same thing, but this year found something called RoundUp Pro at (of all places) an irrigation supply company. It comes in a couple of sizes but I bought the 2.5 gallon container for $165 and it will make about 250 gallons. It is the same product but an even more concentrated version. If you can find it you might be able to save a bit more $$$ [img]/forums/images/icons/laugh.gif[/img].
Agri-Supply sells Gly-Star Pro in 2.5 gallon containers for $59.95. It is 41% Glyphosate concentrate.
They also sell Roundup Original in 2.5 gallon containers for $139.95. It is 48.7% Glyphosate concentrate. They have also had Roundup Ultra Max at 50.2% at various times for a little more money.
You might want to take a look at this thread from last year that discusses 41% Glyphosate and Roundup.
41% Glyphosate and/or Roundup
I bought stuff called Honcho from B&T Grower Supply. 2 1/2 gallons for $80. I see that it is cheaper at Farm Supply. Go with Farm Supply if you have access to it.
This is 41% glyphosate which is same strength as Roundup Pro.
Now I can't find the 48 hour spec. Maybe wrong about that, but it will be the same requirement as Roundup. If you say 2 hours for Roundup, then it will be 2 hours for all glyphosate generics.
The coverage and dilution is going to depend on what you are treating and how tall the weeds are. Your example of 1.5 oz per gallon is a 1% solution. That should work OK for weeds 6" or smaller, and assuming that you give those weeds 'full application' which means they are well sprayed with solution.
The glyphosate specification calls for as low as 1/2 oz for annual weeds less than 6 inches in height, AND used with a surfacant. The mix rates go up from there, up to as high as 5-10% rate for woody brush and trees, or for methods that use 'less than complete coverage'. 5% is 6.5 oz per gallon. 10% is 13oz per gallon. I am running about 4 oz per gallon which is maybe around 4% or so.
I think you are right that I might be running at SLIGHTLY greater ratio than needed. But my original intention was to get the job done quickly, with possibly less than complete coverage and also minimizing the possibility of needing to spot-treat areas later. Maybe next year I will re-assess the application rate. Or maybe I'll experiment with a 2% solution which indeed would reduce the price of the overall application. If you are having successful kill with the 1% rate, then stick with it that way.
Best,
Martin
If you really want to make it easy go out in the spring when things start growing but before anything is up over an inch. Get some Sahara. Spray one time and you are done for the year. Nothing will grow back.
CowboyDoc is right about the weed control but we seem to be ignoring another way to clear a fenc row, especialy barbed wire with t-posts.
Disk a fire break on both sides and burn it. This is better early in the season when there isn't too much big growth and there is enough of last years for fuel. Alternatively spraying enough contact killer (RounUP or whatever) to kill enough biomass to serve as fuel when dry and then burning can be ggod too. With a good burn you can kill everything that is above ground.
Pat